Firearm Maintenance and Why it is Important

The rough definition, Firearm Maintenance – is a series of periodic, preventive maintenance procedures aiming to ensure the proper function of a firearm, often with the use of a variety of specialized tools and chemical solutions.

Just like brushing your teeth to prevent tooth decay and gum disease, firearm maintenance is there to prevent failures, rusting, and other common issues. Firearm maintenance should become a routine and should be part of a regular schedule. Depending on usage and storage should determine your maintenance routine.

Being that a firearm is an expensive investment, a good foundational cleaning kit is a must. Below are the basics and a great place to start when looking to build your cleaning kit.

CLEANING SOLVENTS

Cleaning solvents help remove the carbon buildup from your barrel and other key parts and are best used in conjunction with cotton cleaning patches and swaps. Note that cleaning solvent and gun oils are not the same thing (these will be covered later). You start with solvents and finish with oils. You should only use a minimum amount of cleaning solvent as an excess solvent can negatively impact key firearm parts like the trigger, ejector, and recoil spring. There are many solvents out there, but a few that have stood the test of time are Hoppes & CLP. For most of my cleaning, I tend to use CLP as it works great to both clean and protect parts.

GUN OIL

Gun oil is another necessary piece for effective cleaning of your firearm. It helps lubricate your firearm and protect it from the onset of rust and can help reduce friction on key parts. You find all in one oil and solvents and lubrication-specific oils. Which one to use is a matter of preference, but the most comprehensive solution is usually a combination of a cleaning solvent and separate gun oil. Go-Juice

CLEANING ROD

A good cleaning rod or bore snake is an essential part of any cleaning kit. A good rod will come as a kit with interchangeable pieces, while a bore snake will be specific to your caliber and barrel length. Rods come in several different materials like aluminum, fiberglass, carbon fiber, and brass. Brass usually represents the best option though it will be heavier. It is ill-advised to use any other material as it may scratch your barrel. A bore snake will usually be a cloth material that is semi-absorbent and flexible that is sized specifically to your caliber. Both are a great option, but rods tend to lend themselves to be a little more versatile.

BORE BRUSH

A good quality bore brush (not to be confused with a bore snake) will help remove residue and keep your barrel as clean as possible. Brushes, caliber specific, to be used in conjunction with your rod, so for the best performance, use only approved caliber brushes in your firearm barrel. You can also find some universal brushes, depending on how customized you want your kit to be. Brushes come in a variety of materials, again brass is the most popular material.

PATCH HOLDER

Another essential part of the cleaning process involves a patch holder. Patch holders are configured to fit a variety of barrels, but make sure the patch holder you select is approved for your chosen firearm caliber. Patch holders are usually made of brass, and they will attach to your cleaning rod just like a bore brush. An alternative to a patch holder is a cleaning jag that acts more like a pushing device for the cleaning patch. Jags are slightly less wide than the caliber barrel you’re cleaning, and you’ll need to get one specifically designed for each barrel you plan to clean.

COTTON PATCHES

Of all the items in your kit, make sure you stock up on patches. They are great for running solvent through your barrel, wipe-down slide parts, and overall are a utility item to be used as you see fit, but since they are absorbent and also gather carbon, you can only use them once before they need discarding.

SILICONE CLOTH

A silicone cloth is a pre-treated piece of absorbent fabric, which contains a silicone-type solution. It is the perfect material for use as a wipe-down cloth for the outside of the firearm. When looking to get that little extra oil off and clean the exterior, this is a great final step to your cleaning process. It also helps to avoid rust.

EXTRAS (NOTE: THE FOLLOWING ARE NOT NECESSARY, BUT NICE TO HAVE)

MUZZLE GUARDS

The most seasoned firearm owners always caution owners about cleaning rod damage. For only a few extra dollars, you can add a muzzle guard and protect the muzzle crown from unnecessary damage. Muzzle guards also keep the cleaning rod centered, and they are usually composed of brass materials.

BENCH BLOCK

A bench block is used to help remove pins when taking down a firearm. While not a necessity, they are nice to have. They help keep your take-down pins from flying all over the place during disassembly.

FIREARM CLEANING MAT

If you are cleaning a firearm, then a firearm mat can be a great investment. A quality firearm mat serves several purposes. It provides an ideal cleaning/work surface and is non-slip to keep gun parts in place. They can also be printed with a diagram of your chosen firearm, which can be a guide to where every part fits. Firearm mats are also resistant to cleaning chemicals. They are a good investment for firearm cleaning around the house. They also help protect your work surface.

There are many companies out there that create cleaning kits and mats. Personal preference plays a role in what you choose to use and what brands you ultimately end up using. Below are a few inexpensive options if you are in the market for a starter kit. TekMat

Happy Cleaning!